Here is placeholder text for H1 title
- Product Description
-
- Commodity name: HY20E Two-component matting agent
- 型号: HY20E
- 应用性能: <strong> Gloss: 10–30° </strong> <br /> It enhances surface fineness in two-component systems, reduces gloss levels, offers good impact resistance, minimal fumes, and unaffected storage stability.
- 用法及用量: Added internally at 1-5%
HY20E Outdoor Matting Agent
Brief description
HY20E matting agent is specially for outdoor polyester /TGIC powder coating system matting agent, suitable for more than 15 degrees of gloss (60°) polyester -TGIC powder coating. It has excellent film appearance, yellowing resistance and impact resistance. The consumption of matting agent TGIC is 10:1, the addition amount is small, the cost performance is outstanding, and the cost is greatly saved.
Typical properties:Industrial grade
Appearance: White or light yellow powder
Solid content: ≥98%
Product Application
1 to 5% of the total design amount of matting agent (matting agent: TGIC= 10:1) is evenly mixed with other raw materials to participate in extrusion. The powder can be produced according to the powder production process. The specific dosage can be determined by experiment.
Product features
-- Polyester /TGIC powder coatings adapted with a gloss above 15 degrees (60°).
-- Excellent performance, small dosage, outstanding cost performance.
-- The coating surface is very fine, with excellent yellowing resistance and mechanical properties.
Product packaging
Polyethylene inner bag, kraft paper packing, each bag net weight 25KG.
Storage requirements
Storage matting agent should be stored in a cool, dry, ventilated place sealed storage.
Avoid direct sunlight, high temperature, high humidity and away from fire and heat sources to prevent caking.
Storage temperature less than 30℃, shelf life of 12 months. After the storage date can be renewed Test, if the result meets the requirements, it can still be used.
Warm Tips
- Strengthen the powder production process control, extrusion feeding should be fast, extrusion temperature is low, extinction effect is stable.
- Different manufacturers of filler, polyester and the amount of added affect the luster, the matting agent and other formula components need a certain match.
- The appropriate addition of some curing accelerator can improve the impact strength, but may cause the gloss to rise or the smoothness deviation.
- The increase of extinction dose reactivity increases, the coking time becomes shorter, the gloss becomes lower, which has a certain impact on storage, different types of polyester reactivity is different, customers adjust according to the actual situation, pay attention to powder storage. Please do the experiment before use, and then mass production.
HY20E Outdoor Matting Agent
Brief description
HY20E matting agent is specially for outdoor polyester /TGIC powder coating system matting agent, suitable for more than 15 degrees of gloss (60°) polyester -TGIC powder coating. It has excellent film appearance, yellowing resistance and impact resistance. The consumption of matting agent TGIC is 10:1, the addition amount is small, the cost performance is outstanding, and the cost is greatly saved.
Typical properties:Industrial grade
Appearance: White or light yellow powder
Solid content: ≥98%
Product Application
1 to 5% of the total design amount of matting agent (matting agent: TGIC= 10:1) is evenly mixed with other raw materials to participate in extrusion. The powder can be produced according to the powder production process. The specific dosage can be determined by experiment.
Product features
-- Polyester /TGIC powder coatings adapted with a gloss above 15 degrees (60°).
-- Excellent performance, small dosage, outstanding cost performance.
-- The coating surface is very fine, with excellent yellowing resistance and mechanical properties.
Product packaging
Polyethylene inner bag, kraft paper packing, each bag net weight 25KG.
Storage requirements
Storage matting agent should be stored in a cool, dry, ventilated place sealed storage.
Avoid direct sunlight, high temperature, high humidity and away from fire and heat sources to prevent caking.
Storage temperature less than 30℃, shelf life of 12 months. After the storage date can be renewed Test, if the result meets the requirements, it can still be used.
Warm Tips
- Strengthen the powder production process control, extrusion feeding should be fast, extrusion temperature is low, extinction effect is stable.
- Different manufacturers of filler, polyester and the amount of added affect the luster, the matting agent and other formula components need a certain match.
- The appropriate addition of some curing accelerator can improve the impact strength, but may cause the gloss to rise or the smoothness deviation.
- The increase of extinction dose reactivity increases, the coking time becomes shorter, the gloss becomes lower, which has a certain impact on storage, different types of polyester reactivity is different, customers adjust according to the actual situation, pay attention to powder storage. Please do the experiment before use, and then mass production.
Previous page
Next page
*Note: Please ensure that all information provided is accurate and that your contact details are up to date, so we can reach you as soon as possible.
Contact Us
Address: Floor 1, No. 373-1, Xiaoyanjialou, Hongta Village, Yongzheng Subdistrict, Jinzhou District, Dalian City, Liaoning Province
Contact number:+86 198 2433 9728
Fax: 0411-87818331
Email: huanyu_additive@163.com
Copyright © 2026 Dalian Aidesi New Materials Co., Ltd. All rights reserved.
