Product Center
PRODUCTS
Product Center
Name
Application Performance
Usage and Dosage
Technical Data Sheet
Ideal additive for high-gloss powder coating applications. It Enhances the coating's block resistance, scratch resistance, wear resistance, and impact resistance while having minimal effect on gloss.
Added internally at 0.3–1%
It adjusts surface tension for smooth, glossy coatings, and has strong ability to eliminate pinholes and craters. Special groups enhance powder charging.
Added internally at 0.8-1.2%
It adjusts surface tension for smooth, glossy coatings, and has strong ability to eliminate pinholes and craters. Special groups enhance powder charging.
Added internally at 0.8-1.2%
It adjusts surface tension for smooth, glossy coatings, and has strong ability to eliminate pinholes and craters. Special groups enhance powder charging.
Added internally at 0.8-1.2%
Pure crystalline/powdered benzoin. It removes gases and eliminates pinholes/bubbles for flat coating appearance.
Added internally at 0.3-0.6%
Degassing, eliminates pinholes. It has excellent yellowing resistance, smooth and flat coating surface.
Added internally at 0.4-0.8%
The product optimizes surface tension to achieve a smooth, uniform, and high-gloss coating film; effectively eliminates pinholes and craters; enhances interference resistance. Special groups improve the electrostatic charging capacity of the powder and further increase the gloss of the coating.
Added internally at 0.6%-1.5%
The product effectively removes entrapped gases and low molecular weight volatile substances from the coating. In some formulations, the use of benzoin can be eliminated.
Added internally at 0.3%-0.5%
The product effectively eliminates pinholes and bubbles, improves flowability, increases spray coverage area, and enhances storage stability resulting from inadequate substrate preparation.
Added internally at 0.4%-1%
Does not affect the matting effect.Removes moisture pinholes on cast iron/aluminum. Boosts degassing, lowers benzoin. Increases hardness, scratch/wear resistance. Good compatibility. In spray application, eliminates moisture‑induced pinholes/pores on porous substrates.
Added internally at 0.4~1%
Added externally at 0.2~0.5%
For materials such as cast iron, cast aluminum, and inadequately treated substrates, this defoamer effectively eliminates pinholes and air bubbles, improves powder flowability, expands spray coverage, and enhances storage stability.
Mixed externally or added internally at 0.4%–1%
During the powder melting process, it rapidly adheres to bubble surfaces and allows bubbles to float out of the coating, achieving defoaming. It can eliminate film pores and pinholes caused by moisture trapped in substrates with insufficient density, such as cast iron, cast aluminum, zinc-plated, and titanium‑magnesium alloy workpieces.
Added internally at 0.4%-1%
Added externally at 0.2-0.5%
Added externally at 0.2-0.5%
Contact Us
Address: Floor 1, No. 373-1, Xiaoyanjialou, Hongta Village, Yongzheng Subdistrict, Jinzhou District, Dalian City, Liaoning Province
Contact number:+86 198 2433 9728
Fax: 0411-87818331
Email: huanyu_additive@163.com
Business License
Copyright © 2026 Dalian Aidesi New Materials Co., Ltd. All rights reserved.
